Elevate Bonding Adhesive
For bonding EPDM membrane to wood, metal, insulations and masonry
Not for bonding EPDM roofing membranes together
- Technical Specifications
- Size Guide
Elevate Bonding Adhesive
Elevate Bonding Adhesive from Flexible Roofing Supplies
Elevate Bonding Adhesive BA-2012 is used to attach your EPDM membrane to substrates other than another piece of EPDM. It can be used to bond any EPDM material (Elevate or SealEco) to wood, metal, approved insulations and masonry. Where the roofing membrane is to be fixed to a vertical face, we strongly recommend you mechanically fix the membrane as well, for example using a Termination Bar, as the membrane could, in certain situations, peel away from the wall or vertical face.
Elevate Bonding Adhesive, although safe for aquatic, animal and humans once dried, is a solvent based glue and should therefore be used with care. We would recommend you read through the Bonding Adhesive Technical Information Sheet prior to use; this covers all safety precautions to take and full instructions for use.
| Brand |
Elevate Bonding Adhesive BA-2012 |
| Use With | All EPDM membranes (Elevate & Sealeco) |
| Size | 1l, 2.5l and 10l |
| Other Sizes Available | No |
| Coverage |
2.35-3m2 per litre |
| Aquatic, plant & human safe | Yes |
| Solvents | Naphtha, Cyclohexane, Propylactetate, Butanone |
| Technical Information Sheet | Bonding Adhesive |
| Uses |
Bonding EPDM to: Wood Metal Approved insulations Masonry |
Bonding Adhesive comes in 3 sizes:
| 2.5 litre | circa 2.5 m2 coverage |
| 5 litres | circa 6.25 m2 coverage |
| 10 litres | circa 25.0 m2 coverage |
Please be aware, when using Bonding Adhesive, both surfaces to be attached need to be completely covered with the product.