Elevate Spray Gun with Extension
The spray gun and hose were specifically designed to spray the Elevate sprayable Bonding Adhesive (in canister packaging) and, therefore, cannot be substituted for another kit that may not be compatible with the adhesive.
- Technical Specifications
- Installation Guide
Elevate Spray Gun with Extension
The Elevate Spray Gun Professional (with extension) is to be used in combination with the rubber 4.0 m Hose. The spray gun and hose were specifically designed to spray the Elevate sprayable Bonding Adhesive (in canister packaging) and, therefore, cannot be substituted for another kit that may not be compatible with the adhesive.
Remember that the operator should be wearing personal protective equipment, including safety glasses and gloves.
For further information on the use and maintainence of the Spray Gun, please see the technical information sheet here.
Contents:
• 1 gun/carton
• 1 hose/bag
Part Numbers
• W563581082P – Spraying gun with 60 cm extension
• W563581081 – 4.0m long hose
Spraying
▪ Ensure that the gun and hose are in good condition for spraying and that both are properly connected prior usage.
Turn the adjustment screw of the gun (1) open. The condition of the spray equipment should be checked periodically
during the working day.
▪ Prepare a piece of scrap material for use as a spray gun test target. Pull the spray gun trigger (2) fully to spray
adhesive. Provide a consistent dispersion of the adhesive. Spray width can be set by turning the adjustment screw
more open or closed.
▪ See Application Guide for further installation guidelines.
▪ Always engage the adjustment screw (1) when you stop spraying to prevent the gun from being triggered
accidentally.