75mm (3") EPDM Seam Tape

As Low As £4.14 inc. VAT £3.45 exc. VAT

Seam Tape is a pressure sensitive rubber adhesive tape. It is designed to provide high strength, watertight seams for site joining of EPDM roofing membranes.

Read More

  • Description
  • Technical Specifications
  • Size Guide
  • Installation Guide
Description

75mm (3") EPDM Seam Tape

Seam Tape is a pressure sensitive rubber adhesive tape. It is designed to provide high strength, watertight seams for site joining of EPDM roofing membranes. Seam Tape is soft and tacky, providing a quick grab onto EPDM field membranes yet possesses high initial strength. Seam Tape must always be used with Tape Primer.

Suitable For:

Joining two pieces of EPDM
Joining EPDM to TPO or PVC

Technical Specifications
Size Guide

Width: 75mm (3 inches)
Length: sold in linear metres, max 30.48m in a single piece

Installation Guides

All work surfaces must be clean, dry, and free of dirt.

1. Ensure the two surfaces to be joined overlap by 75mm (3”).

2. Apply Tape Primer to both faces to be joined (top of the bottom layer and underside of the top layer) and allow to tack off

3. Lay the Seam Tape (with its backing paper still in place) over the Tape Primer on the bottom surface

4. Roller the tape to ensure a good bond

5. Slowly remove the backing paper at a 45 degree angle, pressing the top membrane down onto the tape as you go

6. Roller over the top membrane to ensure a good bond. 

Full guide to joining membranes with seam tape. 

As low as £4.14 £3.45