SealEco Tape Primer

As Low As £22.96 inc. VAT £19.13 exc. VAT

SealEco EPDM Tape Primer is designed to clean and prime EPDM before use with tapes and accessories.

Read More

  • Description
  • Technical Specifications
  • Size Guide
  • Installation Guide
Description

SealEco Tape Primer

SealEco EPDM Tape Primer is designed to clean and prime EPDM before use with tapes and accessories. It provides improved adhesion between membranes and EPDM tapes and sealants, and is also an excellent choice for priming concrete, OSB, plywood and metal surfaces.

Unlike thin primers that run and puddle, the high viscosity formulation promotes uniform coverage on both horizontal and vertical surfaces.

Suitable For:

Cover tape, seam tape and flashing tape
Reinforced perimeter strip
Pipe boots
Other detailing work

Technical Specifications
Size Guide

Tape primer is required to be applied to all EPDM membranes or other surfaces where tapes will be fitted. Figures below are for usage when applied to 1 side. 

Options available:
0.95L, 3.8L

Coverage:
5.5m²/L approx
0.95L = 5.23m²
3.8L = 20.9m²

Installation Guides

All work surfaces must be clean, dry, and free of dirt.

1. Using a brush, apply Tape Primer to the surface that the tape will be mated to, ensuring an even coating with no puddling

2. Allow the primer to tack off (dry until touch dry), usually less than 10 minutes

3. Apply the tape or accessory to the primed area

4. Roller over the tape to ensure a strong bond Note: Do not apply tape primer directly to tapes.

As low as £22.96 £19.13