SealEco Contact Adhesive 5000

As Low As £15.80 inc. VAT £13.17 exc. VAT

Contact Adhesive provides excellent adhesion of EPDM membrane to many materials, including stone, concrete, wood and metal substrates.

Read More

  • Description
  • Technical Specifications
  • Size Guide
  • Installation Guide
Description

SealEco Contact Adhesive 5000

Contact Adhesive provides excellent adhesion of EPDM membrane to many materials, including stone, concrete, wood and metal substrates. When using Water Based Adhesive, Contact Adhesive should be used to bond the membrane to the deck for 150mm around the perimeter. It is also used to adhere EPDM membrane to vertical upstands, below tiles where there is a roof interchange and onto details.

Why Choose Contact Adhesive 5000?

Contact Adhesive 5000 is a solvent based adhesive with instant, super strong ‘grab’ once it has flashed off. It is perfect for technical detailing where the membrane must be held in place immediately and not slip or move. When used as a perimeter, Contact Adhesive provides additional bonding strength for the membrane to the deck. Contact Adhesive or P150 Adhesive should also be used to bond EPDM membrane to the deck for all roofs over 100m2.

Suitable For:

Perimeter bonding on wood decks. 
Upstands Detailing work e.g. rooflights etc
Concrete and metal substrates
Interchanges between roofing types

Technical Specifications
Size Guide

Contact Adhesive is required to be applied to both the EPDM membrane and the surface it is to be attached to. Coverage figures below are for usage applied both sides.

Options available: 
1L, 2.5L, 5L

Coverage: 
1.7 m²/l approx
1L= 1.7m²
2.5L= 4.25m²
5L = 8.5m²

Installation Guides

In all circumstances, Contact Adhesive 5000 must be applied to both sides, the membrane and surface it is to be bonded to.

Please note that the membrane will not be possible to move once it has been laid.

Deck Application: Contact Adhesive 5000 should be applied to a 150mm strip around the perimeter of all rubber roofs laid using Water Based Adhesive. Contact Adhesive can be used for the whole deck when applying the membrane to a concrete or metal deck although we would recommend using P150 adhesive for this. Using a mini roller or stiff brush, apply the Contact Adhesive to both the deck and the underside of the membrane. Allow the adhesive to tack off until it is touch dry, then mate the membrane to the deck.

Upstand Application: Apply the contact adhesive to both the upstand and the underside of the EPDM membrane using a mini roller or stiff brush. Allow the adhesive to tack off until it is touch dry. Roll the membrane up the upstand so that it is mated. A roller should be used to ensure an even bond and a penny roller used to detail the angle changes. Full guide to laying EPDM with Contact Adhesive 5000. 

As low as £15.80 £13.17