150mm (6") EPDM Cover Tape

As Low As £11.62 inc. VAT £9.68 exc. VAT

EPDM Cover Tape is 6 inches wide and has been specially designed to cover, protect and seal batten strips and when joining two pieces of EPDM (where there is no overlap).

Read More

  • Description
  • Technical Specifications
  • Size Guide
  • Installation Guide
Description

150mm (6") EPDM Cover Tape

EPDM Cover Tape is 6 inches wide and has been specially designed to cover, protect and seal batten strips and when joining two pieces of EPDM (where there is no overlap). Cover Tape consists of a semi-cured EPDM membrane that has been laminated to an EPDM pressure sensitive tape adhesive. Cover Tape must always be used with Tape Primer.

Suitable For:

Sealing over batten strip
Joining roofing membrane where there is no overlap

Technical Specifications
Size Guide

Width: 152mm (6 inches)
Length: sold in linear metres, max 30.48m in a single piece

Installation Guides

All work surfaces must be clean, dry, and free of dirt.

1. Apply Tape Primer to the whole area the Cover Tape will be applied to and leave to tack off

2. Install the Cover Tape over the primed area

3. Firmly roll across then parallel to the Cover Tape to create a strong bond

4. Finish with Lap Sealant to provide additional protection. 

Full guide to using Cover Tape when installing a rooflight. 

As low as £11.62 £9.68